2021+ Bronco Door Sill Overlay / Protectors Vinyl Decal PPF
3D Carbon (Black) / 4 Door
£41.78
Skip to product information
💥 If you do not protect the paint on your door sills, it will get scratched. These protect your vehicle against accidental contact.
Comes with 1 full set (enough for one vehicle). 4 door vehicles have 4 pieces total and 2 door vehicles have two pieces.
3D Carbon is the easiest to install due to air egress channels. It is also the most scratch resistant.
⭐ INSTALLATION ⭐
📽️ Youtube video: https://youtu.be/5M9P49HM2GQ
Recommended Items:
- Microfiber
- Detailing Spray without wax
- Rapid Tac Application Fluid (in a pinch soapy water)
- Felt tip squeegee
You can search "vinyl install pack" on our store and get some of these tools.
Ideal install temperature is 70-80 degrees. If it is warm, do the install in the shade. Vice versa if it is cooler. Clean the surface of the fender and surrounding area. Spray the surface again with my application fluid and do the same to the overlay as you peel it off the backing paper. This fluid will let you align the material perfectly and prevent it from sticking to itself. In a pinch you can use slightly soapy water (1 drop per 1 cup of water approximately)
Wet the application area and the back of the vinyl. You'll be starting with the rear vent and then working your way forward. The initial install just involves aligning all the pieces to the desired look so keep the vinyl and application area very wet. Once you're happy with the alignment, then you can start pushing out more of the fluid.
If you need to apply light heat for the edges to dry out and stick, go ahead. You can also wait for some of the fluid to dry on it's own, but make sure there are no bubbles before allowing to dry.
2021+ Bronco Door Sill Overlay / Protectors Vinyl Decal PPF
£41.78