2022 GR86 BRZ Special Edition Rear Stripes 2023 2024 2025 2026
Black (Matte)
£65.98
Skip to product information
💥 DESCRIPTION / INSTALLATION 💥
For 2023 Toyota produced a special edition GR86 with similar stripes. Over 15 tries at it and we found what seems to be the most aesthetically pleasing design in terms of complimenting the natural body lines of the vehicle.
NOTE: Sold as a set. 4 total stripes. 2 for driver's side and 2 for passenger side. Fits all 2022+ Toyota GR86 / Subaru BRZ.
‼️ INSTALLATION ‼️
📽️ Video: https://youtu.be/R-E5FanJXsc
Recommended tools:
- Felt tip squeegee
- RapidTac Application fluid (or cup of water with a couple drops of dish / hand soap)
Clean the application area and have soapy water available. Use a drop of dish soap mixed with a full cup of water. We favor our RapidTac Application fluid even more than soapy water though.
Ideal installation temperature is 70-80 degrees and not in direct sunlight or wind. The sunlight may heat up the body panels and/or vinyl too much. This causes it to become flimsy and the shape to change easily.
Apply some of the soapy water to the bottom of the vinyl. It will allow you to slide the vinyl around until you find the proper placement. It will also aide in removing air bubbles.
You want to get the alignment of the piece so that it contours the fenders. Start with the larger piece and use the defroster lines on the rear window as a point of reference. You will want to align the front edge of the larger piece at approximately the sixth defroster lines. Please see the photos.
Once you have to aligned, use your fingers (or a squeegee / credit card wrapped in microfiber) to push out the air and water. To speed up the process of drying you can use light heat from a heat gun or hair dryer.
When the first piece is aligned, begin to apply the smaller piece. It will sit behind the larger stripe by approximately 1 5/16" (or two fingers).
Repeat for the other side.
2022 GR86 BRZ Special Edition Rear Stripes 2023 2024 2025 2026
£65.98