2024 Toyota Land Cruiser Topographic Seatbelt Panel Protection GX550
Carbonized Gray
£65.98
Skip to product information
💥 DESCRIPTION / INSTALLATION 💥
Our topographic map overlay for your inner B pillar is neat and protects this area from seatbelt buckle damage!
Matte finish. Printed graphics with UV resistant laminate. Also fits 2024+ Lexus GX550.
⭐ INSTALLATION ⭐
📹 INSTALL VIDEO: https://youtu.be/VmtQ9pssyq8
You will want to do this in 70-85 degree weather ideally. Stay in the shade unless it is a little on the cool side. Make sure the vinyl is flat before installation.
Recommended items:
Microfiber
Detailer spray to prep the area (without wax)
Vinyl Install Pack (search our store)
Optional Heat gun or hair dryer
Clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty. Do not forget to clean the edges of the trim. Also wash your hands. You do not want to get dirt stuck to the adhesive side of the material. Allow area to dry.
If you do not consider yourself a pretty good installer, do a wet install. Wet your fingers, the back of the vinyl and the trim with our application fluid (from the vinyl install pack). In a pinch you can use 1 drop of dish soap mixed with 1 cup of water. Align triangle and gently push out the water under it. When dry, check final install to verify alignment. If you need to re-do it, use your backup piece. To speed up the drying process you can use a heat gun or hair dryer. Apply very low heat as to not damage the vinyl.
For a dry install, this material is pretty forgiving if installed under the right temperatures. Align the vinyl. Then push out the air carefully as to prevent creasing. Just use your fingers as the piece is small.
The adhesive reacts to PRESSSURE and HEAT.
2024 Toyota Land Cruiser Topographic Seatbelt Panel Protection GX550
£65.98