2024 Toyota Tacoma 4th Gen Fog Light Overlays 2025 Vinyl or Acrylic
Yellow
£28.58
Skip to product information
💥 Description / Instructions 💥
- Easy to apply
- Adds subtle styling
- Changes light output color
- Sold as a pair (extra set included for vinyl)
- NOTE: Not compatible without modification for RIGID lamps (Pro / Trailhunter)
For those that like the look of yellow or amber fogs, we have these very simple overlays that will do just that.
Comparison video: https://youtu.be/66hh10wLnZo
Vinyl sold as a pair (extra set included). Acrylic sold as a pair.
⭐ INSTALLATION ⭐
Clean the application area to prepare it for installation. Just use a wax free detailing spray.
NOTES: We recommend that the installation area be not be in direct sunlight.
- Microfiber
- Detailing Spray
- Soapy Water (we recommend our Rapid Tac Installation Fluid)
- Heat Gun or Hair Dryer (optional)
- Felt Tip Squeegee
Vinyl: Wet installs require one drop of dish or hand soap in a cup of water, however we prefer and highly recommend using Rapid Tac Application Fluid. Apply to the vinyl and the surface of your trim so that the vinyl doesn't stick to anything it touches immediately.
Then you can slide it around until you find the correct position. You can also remove it while both surfaces are wet. Once happy with the alignment, push out the extra water with your fingers and squeegee. Be gentle when using your fingers and a squeegee especially if the vinyl gets warm. Gradually apply more pressure as you get it aligned.
Do not allow water bubbles to form. Work slowly until they are all gone. Allow to dry in the sun and then come back one final time to make sure all the edges are down.
Try doing the install in the shade so it doesn't heat up the vinyl rapidly. Exposure to sun at the end though is encouraged.
You can gently put pressure on the lens of the lamp to get the vinyl behind the plastic trim. Save the extra set or install it on top for a deeper color output.
Acrylic: These have bene upgraded to a clip in system. The black portion will touch the factory fog and the actual lens does not. Insert the lower edge first and then just push the lens in. It will push back on the factory fog and allow the clips to slip behind the bumper cover. See this video:
https://youtu.be/IgG_4ebwqC8
2024 Toyota Tacoma 4th Gen Fog Light Overlays 2025 Vinyl or Acrylic
£28.58