For 2021+ Bronco Rear Oval Overlay Tint 2022 2023 Also Fits Bronco Sport

For 2021+ Bronco Rear Oval Overlay Tint 2022 2023 Also Fits Bronco Sport

Dark Smoke
£9.95
Skip to product information
For 2021+ Bronco Rear Oval Overlay Tint 2022 2023 Also Fits Bronco Sport

For 2021+ Bronco Rear Oval Overlay Tint 2022 2023 Also Fits Bronco Sport

£9.95
Color
💥 INSTALL VIDEO BELOW These overlays accent your OEM emblem and do not require any removal of original parts. They just give them a sleek, subtle look and can knock out the chrome and blue portions. Fits both 2021+ Bronco AND Bronco Sport NOTE: Sold as a pair. AVAILABLE MATERIALS Dark Smoke - Standard dark smoke material. Made in Germany. Dark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA. Light Smoke - Standard light smoke material. Made in Germany. Dark Smoke Stealth - Premium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA. Dark Smoke Honeycomb - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA. Dark Smoke Galaxy - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). A galaxy full of metallic flake in the light. Appears similar to standard dark smoke when backlit. Made in the USA. Red - Standard red material. Made in Germany. Yellow - Standard yellow material. Made in Germany. ⭐ INSTALLATION ⭐ 📽️ Video: https://youtu.be/TXGFcE0iR7g Items you may want to have: - Detail Spray (without wax) - Microfiber Towel or Paper Towel - Dish with soapy water (drop of dish soap + 1-2 cups of water) - Heat gun or hair dryer Clean the application area to prepare it for installation. Do not use a spray with any type of wax in it. Ideal install temperature is between 75-85 degrees. If it is really warm, do the install in the shade. A wet installation is recommended. Use our application fluid or slightly soapy water on the back of the vinyl. This will allow you to move the vinyl around and find the correct alignment. Once aligned, use your fingers to push out the water/air. Use light heat as needed to make sure that the overlay does not crease and adheres properly to the OEM emblem.

You may also like