2021+ Bronco Infinity Landscape Dash Overlays Version 2
Sand Dunes 1
£39.58
Skip to product information
💥 Customize your plain dash with these overlays. Made to fit the area below where they airbag opens up.
Fits all 2021+ Ford Broncos.
CUSTOMIZATION
Please contact us with your ideas.
⭐ INSTALLATION INSTRUCTIONS ⭐
📽️ Youtube video: https://youtu.be/TppDZnZKeHM
This install is fairly simple and straightforward. Just make sure you align the cutout first and go from there.
You will want to do this in 70-80 degree weather ideally. Stay in the shade unless it is a little on the cool side. You may elect to do this install after a drive to get the interior temperature in the target area. If your vehicle is running please make sure you are in a well ventilated area.
Recommended items:
- This Kit (overlays)
- Microfiber
- Detailer spray or interior cleaner to prep the area (without wax)
- Alcohol wipe (optional)
- RapidTac Application Fluid (or one drop of dish soap mixed with 1 cup of water)
- Felt tip squeegee
- Optional Heat gun or hair dryer
Prep by cleaning them thoroughly. You can use isopropyl alcohol, however if it is cold or humid, please wait a few minutes to make sure that they area is dry.
We recommend a wet install. Clean your hands as you will be touching the back of the vinyl a little.
Spray the application area and the back of the vinyl with your fluid. Once the alignment is correct, push out the air and fluid with your fingers. Use firm pressure to activate adhesive for the final pass. For trouble spots and a final pass, use your squeegee. If it is cooler outside, use heat to activate the adhesive as well.
Sometimes you will have to wait for the edges to be able to adhere due to the use of application fluid. You can speed up the drying process with LIGHT heat.
2021+ Bronco Infinity Landscape Dash Overlays Version 2
£39.58