2024 Toyota Tacoma Topographic Seatbelt Panel Protection 2025 2026
Matte Black (Solid)
£65.98
Skip to product information
💥 DESCRIPTION / INSTALLATION 💥
Our topographic map overlay for your inner B pillar is neat and protects this area from seatbelt buckle damage!
Matte finish. Printed graphics with UV resistant laminate. Sold as a left and right pair. Matte black solid option has no design.
⭐ INSTALLATION ⭐
📹 INSTALL VIDEO: https://youtu.be/96OnfZEve0Y
You will want to do this in 70-85 degree weather ideally. Stay in the shade unless it is a little on the cool side. Make sure the vinyl is flat before installation.
Recommended items:
Microfiber
Detailer spray to prep the area (without wax)
Vinyl Install Pack (search our store)
Optional Heat gun or hair dryer
Clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty. Do not forget to clean the edges of the trim. Also wash your hands. You do not want to get dirt stuck to the adhesive side of the material. Allow area to dry.
If you do not consider yourself a pretty good installer, do a wet install. Wet your fingers, the back of the vinyl and the trim with our application fluid (from the vinyl install pack). In a pinch you can use 1 drop of dish soap mixed with 1 cup of water. Align and gently push out the water under it. When dry, check final install to verify alignment. To speed up the drying process you can use a heat gun or hair dryer. Apply very low heat as to not damage the vinyl.
For a dry install, this material is pretty forgiving if installed under the right temperatures. Align the vinyl. Then push out the air carefully as to prevent creasing. Just use your fingers as the piece is small.
The adhesive reacts to PRESSSURE and HEAT.
2024 Toyota Tacoma Topographic Seatbelt Panel Protection 2025 2026
£65.98