Skip to product information
Call it a Velociraptor riding a horse, pony, or bronco. Call it anything you want, but show your vehicle's wild side with this emblem. Comes with pre-applied 3M on the back for an easy install.
Comes in two thicknesses. 1/4" or 1/8". Gloss black finish. Sold as a single unit.
Dimensions
Approximately 5 3/4" tall and 6.8" inches wide. You can tilt the emblem to make it fit various areas.
Care
Acrylic can be polished easily with rubbing compound and a clean microfiber cloth.
INSTALLATION
The perfect installation environment is relatively low humidity and 75-85 degree WEATHER. This allows the adhesive bond to become strong by 24 hours and highest by 72 hours.
Some other items you might want to have on you:
- Microfiber
- Detail spray (without wax)
- Painter's tape
- RapidTac Application Fluid or 1 drop dish soap mixed with 1 cup water
Clean the application area and make sure if it free from dirt, debris, wax, fresh ceramic coating, etc. We recommend using painter's tape to help you level and align your emblems.
The adhesive is VERY sticky so make sure to test fit and double check your placement before removing the adhesive backing.
If you do not trust yourself to place the emblem down correctly the first time, use RapidTac Application Fluid to break the initial bond or soapy water. Once you have found the correct alignment, push down firmly. Allow to dry and then push down firmly again. You can use light heat to accelerate the drying process.
Bronco Buckrap(tor) Acrylic Tailgate Emblem for 2021 2022 2023 2024
£19.95